4V Li-Ion Screwdriver
AFTER SALES SUPPORT
(toll free)MODEL No.: CSD40QU • 10/2019 10997
e-mail: info.aldi@positecgroup.com
AUS
20
1300 889 028
AUS
Protection against discharging
The Li-ion battery is protected against discharging by the “Discharging
Protection System”. When the battery is depleted, the driver is switched
off by means of the protective circuit. The chuck (2) no longer rotates.
When this occurs, you need to recharge the battery.
Maintenance
WARNING: Before carrying out any adjustment, servicing or
maintenance, make sure the screwdriver is turned off.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your power tool.
Wipe clean with a dry cloth.
Always store your power tool in a dry place.
Keep the motor ventilation slots clean.
Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation slots. This is
normal and will not damage your power tool.
The ambient temperature range for the screwdriver use and storage is
0
o
C-40
o
C.
The recommended ambient temperature range for the charging system
during charging is 0
o
C-40
o
C.
Storage and Transportation
Store the screwdriver and the accessories in a dry, clean place which is
protected from the effects of weather and temperature and is out of the
reach of children and animals.
For transportation in vehicles, secure the product against movement or
falling to prevent injury to persons or damage to the screwdriver.
To Next Page
Loading...
Need help?
General
