44
4
Pack contents / parts
Application
First time users or inexperienced operators pay particular attention to the
operation of the 4V Li-Ion Screwdriver, including details of starting and
stopping and correct use of the 4V Li-Ion Screwdriver on pages 18-19, as well
as the maintenance instructions on pages 20.
Intended use of 4V Li-Ion Screwdriver
NOTE: This product is for private domestic DIY use only. It is not suitable for
commercial or trade use.
This 4V Li-Ion Screwdriver is used for driving in and loosening screws.
The screwdriver is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse.
Contents of carton
1 x 4V Li-Ion Screwdriver
1 x Charger
6 x bits (25mm, PH 1-2, PZ 1-2, Slotted 4, Torx T20)
7 x bits (25mm, PH 0-1-2-3, Slotted 5-6-7)
7 x bits (6pc 25mm, PH 0-2-3, Slotted 4-5-6; 1pc 50mm CRV bits)
7 x bits (6pc 25mm, PZ 2-2-3, Torx T20-T27, Slotted 7; 1pc 50mm CRV bits)
1 x Instruction manual
1 x Warranty Card & Certificate
WARNING! Please read and understand this instruction manual before
use and keep it for your future reference. Your power tool should only
be passed on together with this instruction manual.
WARNING! To reduce risk of injury, only use the 4V Li-Ion battery cell inside
the screwdriver. The battery cell must be charged using with the supplied 4V
Li-Ion battery charger.
To Next Page
Loading...
Need help?
General
