4V Li-Ion Screwdriver
AFTER SALES SUPPORT
(toll free) MODEL No.: CSD40QU • 10/2019 10997
e-mail: info.aldi@positecgroup.com
AUS
21
1300 889 028
AUS
Warranty
Your new WORKZONE
®
4V Li-Ion Screwdriver will more than satisfy your
expectations.
It has been manufactured under stringent WORKZONE
®
Quality
Standards to meet superior performance criteria.
You will find your new 4V Li-Ion Screwdriver easy and safe to operate,
and, with proper care, it will give you many years of dependable service.
CAUTION. Carefully read through this entire instruction manual before
using your new WORKZONE
®
4V Li-Ion Screwdriver. Take special care to
heed the Cautions and Warnings.
Your WORKZONE
®
4V Li-Ion Screwdriver has many features that will
make your job faster and easier. Safety, performance, and dependability
have been given top priority in the development of this 4V Li-Ion
Screwdriver, making it easy to maintain and operate.
Use only WORKZONE
®
replacement parts for your product. Non-
conforming parts or modifications made to parts will void your warranty.
What your 3 year warranty means
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly.
In the event of product failure within its intended use over the course of
as quickly as possible once it has been brought to our attention. In the
unlikely event of such an occurrence, or if you require any information
about the product please contact us via our after sales support services,
details of which can be found in this manual and on the product itself.
After Sales Support TEL: 1300 889 028
Service Support
If you have any issues with the operation of your product, please call our
Customer Service on 1300 889 028 for advice, or email us at
info.aldi@positecgroup.com
To Next Page
Loading...
Need help?
General
