4V Li-Ion Screwdriver
AFTER SALES SUPPORT
(toll free)MODEL No.: CSD40QU • 10/2019 10997
e-mail: info.aldi@positecgroup.com
AUS
22
1300 889 028
AUS
Environmental protection
Recycle unwanted materials instead of disposing of them as
waste. All tools, hoses and packaging should be sorted, taken to
the local recycling centre and disposed of in an environmentally safe way.
FAQ/Troubleshooting
FREGUENTLY ASKED QUESTION
1. REASONS FOR DIFFERENT BATTERY CELL WORKING TIMES
Having not used the screwdriver for a prolonged time will reduce the
battery cell working time. This can be corrected after several charge
and discharge operations by charging & working with your screwdriver.
Heavy working conditions such as large screws into hard wood will
use up the battery cell energy faster than lighter working conditions.
Do not charge your screwdriver below 0
o
C and above 40
o
C as this will
affect performance.
2. WHAT IS THE FUNCTION OF THE FORWARD/REVERSE ROTATING?
Forward/reverse rotating function allows you to change the direction
of the motor while the forward rotating on/off switch (8) or reverse
rotating on/off switch (9) is not depressed.
Driving in uses the forward mode. The reverse mode is intended for the
removal of screws.
3. WHAT DO I DO IF I HAVE AN ISSUE WITH MY SCREWDRIVER?
If you have any issues with your screwdriver, please contact our
Customer Service line on 1300 889 028.
For further inquiries or issues associated with your glue gun, call our
Customer Service on 1300 889 028 or email us at
info.aldi@positecgroup.com
To Next Page
Loading...
Need help?
General
