ALDI Workzone CSD40QU - Troubleshooting Guide

4V Li-Ion Screwdriver
AFTER SALES SUPPORT
(toll free) MODEL No.: CSD40QU • 10/2019 10997
e-mail: info.aldi@positecgroup.com
AUS
23
1300 889 028
AUS
TROUBLESHOOTING
Problem Possible cause Solution
Battery will not
charge
1. Charger not plugged
into a working outlet.
2. Surrounding air
temperature is too hot
or too cold
1. Plug charger into a
working outlet. Check
current by plugging in a
lamp.
2. Move charger to an
appropriate place which
temperature is suitable for
the charger.
Driver stops during
driving screws
Driver battery is out of
power
Make sure the driver is fully
charged before using it.