24V Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: №. CDI224 • 09/2020 • 63524
(toll free)
26
indicator.
How do I select drill function (Non Hammer)?
When using the drilling function the torque control has no eect to the output of the
drill. The drill function (15) is used when using the drill to drill holes in metal, non ferrous
material, wood, plastic and similar materials. Rotate the function selection collar (3) so
the symbol of the drill bit (15) aligns with the triangular indicator on the top of the drill
housing.
How do I select screw / driver function?
Rotate the function selection collar (3) so to align the screw symbol (14) with the triangular
indicator on the top of the drill housing. To adjust the torque setting, rotate the torque
setting /collar (2). The higher the number, the higher the output torque. Align the required
torque setting number with the triangular indicator on the top of the drill.
Torque setting is 11.
What is the function of the Forward / Reverse switch?
This forward / reverse swicth (6) will allow you to change the direction of the motor while
the trigger switch is not depressed.
Drill/driving uses the forward mode. The reverse mode is intended for the removal of
screws and assisting to remove jammed drill/driver bits.
What do I do if I have an issue with my drill?
If you have any issues with your drill/driver, please contact our Customer Service line on
1300 889 028.
To Next Page
Loading...
Need help?
General
