700W AIRLESS SPRAY STATION
27
700W AIRLESS SPRAY STATION
26
14. RESIDUAL RISKS
Additional residual risks may arise when using the tool which may not be
included in the enclosed safety warnings. These risks can arise from misuse,
prolonged use etc.
Even with the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks cannot be avoided.
These include:
• Injuries caused by touching any rotating/moving parts.
• Injuries caused when changing any parts, blades or accessories.
• Injuries caused by prolonged use of a tool. When using any tool for
prolonged periods ensure you take regular breaks.
• Impairment of hearing.
• Health hazards caused by breathing in paint when using your tool.
15. TROUBLESHOOTING
Problem Possible Cause Possible Solution
Cannot start The airless spray station is not
plugged in
Connect the plug to the mains
The ON/OFF switch is set to
"off" position
Press the ON/OFF switch to "on"
position
The supply cord is damaged Check the supply cord and
replace with a new one if
needed
The airless spray station is
faulty
Repair by an authorised service
centre
Fig.20 Fig.21
13. DISPOSAL
Dispose of appliances according to the regulations and requirements
of your local council.
This appliance should not be disposed of as domestic waste.
Disposal Troubleshooting
K
K
J
Plastic Plug
To Next Page
Loading...
