700W AIRLESS SPRAY STATION
5
700W AIRLESS SPRAY STATION
4
Application
2. PARTS DESCRIPTION
Fig.A
7
6
5
4
3
2
1
8
9
11
12
13
14
10
1. Trigger guard 10. Motor housing
2. Spray tip guard 11. Return tube
3. Spray tip 12. Suction tube
4. Spray gun 13. Suction tube filter
5. Trigger 14. Spray hose
6. Pressure control dial 15. On/off switch
7. Carry handle 16. Paint outlet port (for spray hose)
8. Prime/spray knob 17. Return tube inlet port
9. Metal stand 18. Suction tube inlet port
AIRLESS SPRAY STATION 700W
PLD3090
1. APPLICATION
This Airless Spray Station is designed for coating and painting applications.
It can draw material/paint directly from a material/paint can. It delivers
3000psi and can cover a large area in a short period of time. It is not intended
for use with flammable or combustible materials. The Airless Spray Station
is designed for domestic use only and is not designed for commercial, trade
or industrial use.
WARNING! Pl
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved.
Cleaning and user maintenance shall not be made by
children without supervision.
ease read and understand this instruction manual
before use and keep it for future reference.
If passing on your power tool,
this manual should also be included.
WARNING!
WARNING!
WARNING!
Children should be supervised to ensure that they do not
play with the appliance.
Parts Description
To Next Page
Loading...
