700W AIRLESS SPRAY STATION
11
700W AIRLESS SPRAY STATION
10
c)
Disconnect the plug from the power source and/or the battery pack
before making any adjustments, changing accessories,
or storing
power tools.
Such preven
safety measures reduces the risk
the power tool accidentally.
d)
Store power tools out of reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the tool .
Power tools are dangerous in the hands of untrained
users.
e)
Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tools operation. If damaged, have the power tool repaired
before futher use.
Many accidents are c
aused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cu tools
with sharp cu
re less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits in accordance with
these instructions, taking into account the working conditions and
the work to be performed.
Use of the power tool for opera
different
from those intended could result in hazardous situa
.
5.5 Service
a)
Have your power tool serviced by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
General Power Tool Safety Warnings
6. SAFETY INSTRUCTIONS FOR AIRLESS SPRAY
STATION
WARNING!
• Never aim the spray gun at yourself, any person or animal.
• Never spray near a naked flame, including an appliance pilot light.
• Never smoke whilst spraying.
• Never allow children to operate or play with the spray gun.
• Never operate the spray gun if there are any leaks or faults.
• Release the pressure in the spray gun when not in use. Pressure can
remain in the unit and hose when switched off.
DANGER: Never immerse the Airless Spray Station in liquid.
This could lead to electric shock, personal injury and material
damage.
a)
The airless spray station must not be used for spraying flammable
paints and solvents with a flash point of less than 21°C.
Flash point is
the temperature that a fluid can produce enough vapours to ignite.
b)
Always ensure there is adequate ventilation and that
suitable breathing
protection is worn while spraying indoors.
c)
Always wear eye protection
To keep
hazardous vapours and liquid out of
the eyes.
d)
Wear protective clothing to keep paint off skin and hair.
e)
Avoid all ignition sources such as static electric sparks, open flames,
pilot lights, electrical appliances and hot objects.
Connec
ng or
disconnec ower cords or working a light switch can make sparks.
f)
Ensure you have access to a fire extinguisher
That is working and in good
order when spraying.
g)
Do not use indoors with flammable or oil-based sprayable materials.
Use only outdoors in a well-ven
ted area. Flammable vapours are o en
heavier than air. The turbine contains arcing parts that emit sparks and can
ignite vapours.
Safety Instructions For Airless Spray Station
To Next Page
Loading...
