Alecto WS5200 - Page 68

68
To save and proceed to the next alarm setting, press the Mode button.
To exit the High Alarm Set Mode at any time, press the LIGHT button.
Table 9 summarizes the alarm mode sequence and commands.
Command
Mode
Settings
[MODE] +
2 seconds
Enter High Alarm
Set Mode, Alarm
Hour
Press [TEMP +] or [WIND -] to adjust
alarm hour up or down.
Press [RAIN/PRE] to turn the time alarm
on or off. When the alarm is on, the alarm
time icon will appear.
[MODE]
Alarm Minute
Press[TEMP +] or [WIND -] to adjust
alarm minute up or down.
Press [RAIN/PRE] to turn the time alarm
on. The alarm time icon will appear.
Press [RAIN/PRE] again to turn the time
alarm off. The alarm time icon will
disappear.
[MODE]
Alarm High Indoor
Temperature
Press [TEMP +] or [WIND - ]to adjust
alarm value up or down.
Press [RAIN/PRE] to turn the alarm on.
The alarm icon will appear.
Press [RAIN/PRE] to turn the alarm off.
The alarm icon will disappear.
[MODE]
Alarm High Indoor
Humidity
Press [TEMP +] or [WIND -] to adjust
alarm value up or down.
Press [RAIN/PRE] to turn the alarm on.
The alarm icon will appear.
Press [RAIN/PRE] to turn the alarm off.
The alarm icon will disappear.