8 Alere Cholestech LDX
®
System User Manual
Power Socket,
9V—1A
Connects power
supply to analyzer.
Printer Port
Connects printer
to analyzer.
ROM Pack
Contains upgradable
firmware.
ROM Pack Clip
Cable Support
In the back of the analyzer are two ports: a circular port for the
power supply and a rectangular port used for connecting the
analyzer to a printer. There is also a ROM pack that contains
upgradable rmware. The power supply provides the analyzer
with 9 volts DC at 1 amp. A country-specic power supply is
included.
NOTE: The Alere Cholestech LDX
®
Analyzer contains a battery
that cannot be replaced by the user. Battery life is greatly reduced
if the analyzer is left unplugged. To conserve this battery, we
recommend plugging in the analyzer when not in use.