EasyManua.ls Logo

Alert 650R User Manual

Default Icon
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
. .
Question and Answer IconNeed help?

Do you have a question about the Alert 650R and is the answer not in the manual?

Alert 650R Specifications

General IconGeneral
BrandAlert
Model650R
CategoryRemote Starter
LanguageEnglish

Summary

WARRANTY

Alert Warranty Information

Details product warranty, lifetime warranty on control module, and two-year warranty on parts.

Limitation of Remedies

Outlines the purchaser's remedy, limited to repair/replacement, and disclaims incidental damages.

WIRING CONNECTIONS

Main Harnesses (H1, H2)

Details connections for 6-pin and 5-pin harnesses for ignition, power, and lights.

Input/Output and Safety Harnesses (H3, H5, H6, H7, H8)

Covers 4-pin transceiver, 9-pin input, 3-pin door lock, 4-pin shock sensor, and 10-pin output harnesses.

Accessory and System Connections (H9, H10, Vacuum Locks)

Details valet switch, LED indicator, and vacuum door lock system connections.

PROGRAMMING

AUTOMATIC OR MANUAL TRANSMISSION VEHICLE

Provides notes on installing the system on automatic and manual transmission vehicles.

REMOTE TRANSMITTER PROGRAMMING

Step-by-step guide to programming remote transmitters to the system's control module.

FEATURES PROGRAMMING

Covers programming for alarm features, start features, and engine checking modes.

TESTING MODES

Explains how to use the alarm test mode to check sensor sensitivity and system functions.

DIAGNOSTICS & TESTING

SHUTDOWN DIAGNOSTICS

Reports the cause of the last shutdown of the remote starter system via LED flash patterns.

INSTALLATION TESTING PROCEDURES

Details critical tests to perform after installation to ensure proper operation and safety.

NEUTRAL START SAFETY TEST

Verifies the neutral safety switch functionality to prevent unintended starting.

KEY IN SENSOR CIRCUITS

Provides alternative methods for integrating key-in-sensor circuits if the factory circuit is unavailable.