Alesis ANDROMEDA A6 User Manual

Chapter 5: Oscillators and Filters
130 ANDROMEDA A6 REFERENCE MANUAL
MOD Parameters
DISPLAY
PAGE PANEL LABEL
PARAMETER
DISPLAY
OPTIONS
or RANGE
DESCRIPTION
MOD1
MOD2
MOD3
MOD 1
MOD 2
MOD 3
— SOURCE Any of the A6’s
79 modulation
sources.
Use soft knob 1 to scroll through the list of
possible modulation sources.
— LEVEL -100 ··· +100
This parameter sets the amount of modulation
that will affect the selected destination. Keep
in mind that negative values invert the action
of the selected source. For example, if Velocity
is the source and a negative value for
LEVEL is
used, playing harder will reduce the level of
the destination.
— OFFSET -100 ··· +100
This parameter sets the offset for the selected
modulation.
— ENABLE OFF, ON
This parameter is used to turn the selected
MOD on or off.
— DEST
FREQUENCY,
RESONANCE
Use soft knob 7 to select either FREQUENCY or
RESONANCE as the modulation destination.

Alesis ANDROMEDA A6 Specifications

General

Brand	Alesis
Model	ANDROMEDA A6
Category	Synthesizer
Language	English