Chapter 2: Playing the A6
50 ANDROMEDA A6 REFERENCE MANUAL
PAGE PARAMETER
OPTIONS
or RANGE DESCRIPTION
TXMODE
Sets the control output of the A6 keyboard:
KEYBD
continued
LOCMID
The keyboard will play the A6’s voices and
transmit MIDI Notes.
MIDI
The keyboard will transmit MIDI Notes only –
the A6’s voices will not be played by its
keyboard. This setting is the same as “Local Off”
on other instruments.
LOCAL
The keyboard will play the A6’s voices only –
the A6 will not transmit MIDI Notes played on
its keyboard. This setting is the same as “MIDI
Off” on other instruments.
MIDICH 1 ··· 16
When the keyboard MODE is set to MIDI ONLY,
this parameter sets the MIDI Channel that the
keyboard will use to transmit. This parameter is
only displayed when
MODE is set to MIDI ONLY.
AFTCH 0 - 100
Adjusts keyboard aftertouch sensitivity. A
setting of 0 makes the keyboard less sensitive to
aftertouch. A setting of 100 makes the keyboard
more sensitive to aftertouch.
VSTEAL ON, OFF
Sets whether voice stealing will take place.
Voice stealing usually occurs when the
polyphony of the instrument (in this case,
sixteen voices) has been exceeded and an old
voice has to be “stolen” (silenced) in order to
play a new one. If voice stealing is turned off, no
new notes will sound after the polyphony has
been exceeded. The default setting is “on”.
To Next Page
Loading...
Need help?
General
