REAL TIME MIDI SEQUENCING
41
you will backup your file to) must be inserted and re-
moved from the disk drive.
4) Press the DO/YES button again. The display will show:
PLEASE INSERT
BACKUP DISK. OK?
5) Eject the source disk, insert the backup disk, and press
the DO/YES button. The display will briefly read:
Checking Disk
The display will then show:
XX PLEASE INSERT
ORIG DISK. OK?
XX denotes the number of disk swaps remaining.
6) After ejecting the backup disk and inserting the source
disk, press the DO/YES button again. The display will
briefly read:
Reading from the
Original Disk. . .
Then the display will read:
XX PLEASE INSERT
BACKUP DISK. OK?
7) After ejecting the backup disk and inserting the source
disk, press the DO/YES button again. The display will
briefly read:
Writing to the
Backup Disk . . .
After backup is complete, the following is temporarily
displayed before DATADISK returns to the start of the
Backup function.
To Next Page
Loading...