ALESIS FUSION
EDITING AN ANALOG SYNTH PROGRAM
How to edit a VA synth program
To edit a VA synth (analog) program, select one as appropriate
in the usual way using the data
wheel, the INC/DEC keys or a combination of the BANK keys and the A-P/1-8 keys.
For example, [ROM preset 1] K-1:
There are other examples in the ROM presets to choose from as the
basis for your edit.
Whichever you choose, press the EDIT key located around the data wheel.
To edit the synthesiser parameters, press the SYNTH soft key (highlighted on the left of the
LCD in the screen shot shown below). You will see this screen:
You can now choose to edit the oscillator(s), filter, envelopes and LFO(s) using the soft keys
down the right hand side of the LCD.
Other aspects of the program can be selected using the soft keys down the left of the LCD.
This ‘How To’ tutorial follows a sequential approach -
i.e. oscillators then filters then envelopes
then LFOs, mod matrix, effects. You can use the
bookmarks in this PDF to skip directly to the
section you want.
For
detailed information about the principles employed in Fusion’s VA synth, please refer to
the in-depth analog synthesis tutorial that is also available for download hereabouts
Page 1
To Next Page
Need help?
General
