Alesis Fusion Manual

ALESIS FUSION EDITING AN ANALOG SYNTH PROGRAM
How to balance / mix the oscillators
Press OUTPUT to see this screen:
Move the cursor to the OSC VOLUME field using the NEXT (or PREV) key by the data wheel
and use the data wheel to set a value as appropriate.
Select the oscillator you wish to adjust using the EDIT OSC field (highlighted in the above
screen shot)
When OPTIMIZE TO MONO is unchecked, an extra PAN parameter is shown:
This allows to ‘spread’ the three oscillators across the stereo image for a wider sound (useful for
ensemble sounds such as strings, pads, etc.).
At any time, press EXIT or SYNTH to return to the main menu.
Page 3

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone