Alesis Fusion Manual

ALESIS FUSION EDITING AN ANALOG SYNTH PROGRAM
How to add a new mod route
If you are feeling adventurous, you might want to add your own mod routing. It’s actually not
difficult. A silly example perhaps but let’s say you want to route Envelope 1 to pitch to create
an octave sweep for a special effect.....
In the ROUTES page, press ADD MOD. You will automatically be taken to this screen:
As you can see, no assignments are made.
In the SOURCE field, use the INC key until ENVELOPE is shown:
By default, ENV1 is selected in the index field so you don’t have to change that. Now move
the cursor to the DESTINATION field:
Page 10

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone