EasyManuals Logo

Alesis MASTERLINK ML-9600 User Manual

Alesis MASTERLINK ML-9600
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Chapter 6
ALESIS ML-9600 REFERENCE MANUAL 1.00 19
NEW CD
F
EATURES
5.1 MOVE ENTIRE CD TO PLAYLIST
MasterLink version 1.0 software gave you the ability to copy Red Book and CD24 tracks
directly to a playlist from the internal CD drive one track at a time (covered in Section 7.2 of
the MasterLink User's Manual). In addition, version 2.0 software gives you the ability to copy
all tracks at once from a Red Book or CD24 disc.
The Move CD to Playlist function is accessed through the TRACK MOVE button while the
MasterLink is in CD mode. Like the CD Track Move function in version 1.0 software, the
Move CD function moves tracks from the CD into the currently selected playlist. It is
important, therefore, to make sure that you have selected the appropriate playlist before
switching to CD mode.
After switching to CD mode (via the HD/CD button), pressing the TRACK MOVE button
will bring up the CD track move page, as shown in Figure 5.1.1.
Figure 5.1.1
CD Track Move Page
To copy an entire CD to the currently selected playlist, press the CURSOR LEFT button until
the cursor is under the "CDTrk" field, then press the UP/YES button, which will bring up the
display shown in Figure 5.1.2.
Figure 5.1.2
Move CD to Playlist Page
Pressing TRACK MOVE again will prompt you with an "Are you sure? Y/N" message.
Pressing DOWN/NO at that point will cancel the CD Move operation. Pressing UP/YES at the
prompt will confirm the CD Move and will begin the process.

Other manuals for Alesis MASTERLINK ML-9600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alesis MASTERLINK ML-9600 and is the answer not in the manual?

Alesis MASTERLINK ML-9600 Specifications

Audio Specifications IconAudio Specifications
ADC24-bit 128X oversampling
DAC24-bit 128X oversampling
Sample rates supported44.1kHz, 48kHz, 88.2kHz, 96kHz
Word lengths supported16-, 20-, and 24-bit
Analog I/O IconAnalog I/O
Frequency response at 44.1kHz/48kHz20Hz – 20kHz +0dB, -0.3dB
THD+N at 44.1kHz/48kHz<0.002% @1kHz, -1dBFS
Signal-to-noise ratio at 44.1kHz/48kHz113dB, A-weighted
Digital I/O IconDigital I/O
Supported protocols type IIEC 958
Supported protocols balancedAES/EBU
Supported protocols coaxialCoaxial
Weight and Dimensions IconWeight and Dimensions
Height3.5"/2U
Width17"
Depth11"

Related product manuals