24
6. On the “General” tab, select any available MasterControl channels as the “Playback Timing
Master.” We recommend “ASIO Alesis FireWire MasterControl DAW1,” which corresponds to the
physical MON / LINE OUTPUTS 1 and 2 on the MasterControl.
7. Select any available analog MasterControl channel as the “Playback Record Master.” The
available channels (corresponding to the MasterControl’s input channels) will depend on the
sampling rate, which you can also set here in the “General” tab. Note that the options will always
be odd-numbered channels as each channel shown actually corresponds to a stereo pair of
channels on the MasterControl.
To Next Page
Loading...
