3 Installation
3.4 Recycling information
• Unpacking
- Packing material consists of wood, plastics, cardboard boxes and in some cases metal straps.
- Wood and cardboard boxes can be re-used, recycled or used for energy recovery.
- Plastics should be recycled or burnt at a licensed waste incineration plant.
- Metal straps should be sent for material recycling.
• Maintenance
- During maintenance,
oil and wear parts in the machine are replaced.
- All metal parts shoul
d be sent for material recycling.
- Worn out or defectiv
e electronic parts should be sent to a licensed handler for material recycling.
- Oil and all non-metal
wear parts must be disposed of in agreement with local regulations.
• Scrapping
- At the end of use, the equipment must be recycled according to the relevant, local regulations. Besides the equipment itself,
any hazardous residues from the process liquid must be considered and dealt with in a proper manner. When in doubt, or in
the absence of local regulations, please contact your local Alfa Laval sales company.
10
To Next Page
Loading...
Need help?
General
