Need help?Do you have a question about the Alfa Laval M6 and is the answer not in the manual?
General| Type | Plate Heat Exchanger |
|---|---|
| Gasket Material | NBR, EPDM, Viton |
| Model | M6 |
| Connections | Flanged |
| Application | HVAC |
| Frame Material | Carbon Steel |
| Temperature Range | -20°C to 150°C |
| Plate Thickness | 0.5 mm |
| Plate Material | Stainless Steel |
Highlights potential hazards and necessary precautions for safe operation and maintenance.
Explanation of the data and markings found on the heat exchanger's name plate.
Essential checks and considerations to be made before proceeding with the installation.
Instructions for safely lifting and raising the heat exchanger during installation.
Detailed steps for safely starting up the heat exchanger and checking for leaks.
Best practices for operating the heat exchanger, including flow rate adjustments and monitoring.
Instructions for safely stopping the heat exchanger and draining it if necessary.
General advice on routine checks and upkeep to ensure optimal performance.
Procedure for pressure testing the unit to verify sealing after maintenance or reassembly.
To Next Page
