201
8 Technical Reference 8.8 Lubricants
8.8 Lubricants
8.8.1 Introduction
The machine is delivered without oil in the worm
gear housing. It must not be started unless oil in
the quantity and of the quality prescribed has
been supplied. A change of the separating
temperature can make it necessary to replace the
oil by oil of a different type. Lubricants, oil as well
as grease, must be kept in clean, closed cans to
prevent penetration of dust and moisture and to
reduce the oxidizing effect to the air as far as
possible. The storing room should be dry and
cool.
To Next Page
Loading...
Need help?
General
