2 Safety
All warnings in the manual are summarized on this page.
Pay special attention to the instructions below so that severe personal injury and/or damage to the valve are avoided.
2.3 Safety precautions
Installation:
Always observe th
e technical data (see chapter 6 Technical data)
!
Always release compressed air after use.
Operation:
Always observe
the technical data (see chapter 6 Technical data)
!
Never touch the valve or the pipelines when processing hot liquids or when sterilizing
Always handle lye and acid with great care
Maintenanc
e:
- Always observe the technical data (see chapter 6 Technical data)
!
- Always release compressed air after use
- The valve must Never be hot when servicing it
- The valve/actuator and the pipelines must never be pressurised when servicing the valve/ actuator
- Never stick your fingers through the valve ports if the valve is supplied with compressed air.
Transportation:
Always secure that compressed air is released
Always secure that all connections is disconnected before attemt to remove the valve from the installation
Always drain liquid out of valves before transportation
Always used predesigned lifting points if defined
Always secure sufficient fixing of the valve during transportation - if special designed packaging material is available it
must be used
6
To Next Page
Loading...
Need help?
General
