P.27
CHASE
MUSIC RUN CHASES
1 ∙ Press one of the six CHASE buttons to select your desired chase.
2 ∙ Press and release the MUSIC/BANK-COPY button. The corresponding LED will ash in the LCD.
3 ∙ Your chase will now run to the sound.
When you exit a chase by pressing the CHASE button, the controller will
automatically run the scenes that are in the last bank accessed.
To stop the movement of the lights either use the BLACKOUT button or press
MUSIC if in music mode or the AUTO button.
BANK
COPY BANK
This function enables you to copy the settings of one bank to another bank.
1 ∙ Press and hold the PROGRAM Button for three seconds to activate the programming mode.
2 ∙ Select the bank you want to copy.
3 ∙ Press and release the MIDI/ADD button.
4 ∙ Select the bank into which you want to copy to.
5 ∙ Press the MUSIC/BANK COPY button. The LCD display will ash shortly to indicate the copy has been nished.
DELETE A BANK
1 ∙ Press and hold the PROGRAM Button for three seconds to activate the programming mode.
2 ∙ Select the bank to be deleted. Press the AUTO/DEL and MUSIC/BANK COPY at the same time to delete the
Bank. The LCD will ash to indicate thefunction completion.
COPY A BANK TO A CHASE
1 ∙ Press and hold the PROGRAM Button for three seconds to activate the programming mode.
2 ∙ Select the bank of scenes you wish to copy.
3 ∙ Select the chase to which you want to copy the bank of scenes.
4 ∙ Press MUSIC/BANK COPY, and MIDI/ADD simultaneously. The scenes of the bank are copied to the Chase.
5 ∙ Press and hold the PROGRAM Button for three seconds to exit programming mode.
QUICKQUICK
TIPS
To Next Page
Loading...