19
Clear Counters
This function allows to clear the energy counters. To reset the values,
press ENTER key when the highlighted bar is on CLEAR COUNTERS. The
instrument requests confirmation to clear data.
Available choices:
YES• reset data; before clearing, the instrument requests the password:
insert it within 5 s, pressing UP and DOWN keys simultaneously.
An Energy Counters page will be displayed
NO• data are not cleared. The previous Utility Setup page will be displayed
Clear DMD&Peak
This function allow to clear the DMD&Peak values.To reset the values,
press ENTER key when the highlighted bar is on CLEAR DMD&PEAK. The
instrument requests confirmation to clear data.
Available choices:
YES• reset data. A DMD&Peak page will be displayed
NO• data are not cleared. The previous Utility Setup page will be displayed
Backlight [s]
Display backlighting setup. It can be programmed in range 0÷999 s. When
the backlight is OFF, press any key to activate it. If it is set 0, the instrument
backlight is always ON.
Language
This function allows to select one of the available languages for the displayed
messages.
ENG• English
DEU• German
FRA• French
8.4.5 Pushbutton functions
The following procedure allows to set or modify the Setup values. From any Setup page:
Press 1. ENTER key to enable the modification. The value or the first digit will start to flash
Press 2. UP or DOWN key until the required value is displayed
Press 3. MENU key to move the selection to another digit (or group of figures)
Confirm the value with 4. ENTER key
To Next Page
Loading...
Need help?
General
