D. System Menu:
The AlgoOS system settings can be changed in the system menu. The system menu includes
Working Mode, Screen, Sound, Clean SD Card, Formatting SD Card, and Reset Machine.
E. Working Mode:
There are three working modes in the AlgoOS system that is XYZ Plane Mode, ARR Roller Mode
and ARC Chunck Mode.
XYZ Plane Mode: Supports engraving in the XY plane;
ARR Roller Mode: Supports rolling engraving with external accessory Rotary Roller;
ARC Chunck Mode: Supports gripping and engraving with external ARC Chunck jaws.
54
To Next Page
Loading...