5 www.Observint.com
Observint strongly recommends that you change the default admin user password to improve the security of your surveillance system.
To change the admin password, check the New Admin Password box, then enter the new password in the New Password and
Conrm elds.
4. Click the Next button to open the date and time settings window.
After the Alibi splash screen appears (see above), the NVR will check the status of HDDs installed within the chassis, and show the
show icons on the screen indicating their status. A green check mark on the icon indicates that the associated HDD is operating
normally. If you installed new (or uninitialized) HDDs in the chassis before running the Wizard, those HDDs must be initialized before
use. HDD initialization can be performed within the wizard and within the rmware menu system.
Following the splash screen, a monitor resolution screen may appear. Open the drop down list and select the monitor resolution you
prefer, then click OK.
2. The Setup Wizard can assist you in making important conguration settings in DVR. Click Next button on the Wizard window to open
the Login window.
NOTE
The conguration settings presented in the setup Wizard can also be made and changed using the Menu system. See Chapters 5 - 7
for more information.
3. Enter the admin password in the appropriate eld. To do that, click inside the Admin Password eld to open the virtual keyboard.
Click the appropriate keys (icons) to enter the password, then click the Enter icon. The default admin password is 1111.
© 2014 Observint Technologies. All rights reserved.
To Next Page
Loading...
Need help?
General