Need help?Do you have a question about the Alicat FlowVision 2.0 and is the answer not in the manual?
General| Brand | Alicat |
|---|---|
| Model | FlowVision 2.0 |
| Category | Measuring Instruments |
| Language | English |
Details the necessary software and hardware for installing and running FlowVision 2.0.
Provides step-by-step instructions for installing the FlowVision 2.0 software onto a computer.
Explains the main window, module panel, and how to manage tabs in FlowVision 2.0.
Describes the left-hand panel for accessing modules and managing entries.
Details how to separate, dock, and re-attach tabs within the FlowVision 2.0 workspace.
Guides on establishing a connection with a device using a serial COM port.
Explains how to wirelessly connect an Alicat device using Bluetooth capabilities.
Covers status indicators, device actions like Reset Totalizer, Lock Screen, Refresh, Tare, and Duplicate.
Instructions on how to change the gas type measured by a device.
Explains how to change setpoint values and types for controllers.
Details how to dispense gas in batches using the totalizer function.
Controls device communication, including name, COM port, baud rate, and polling rate.
Guides on adjusting measurement units for displayed data.
Explains how to smooth fluctuating readings by adjusting averaging time.
Details how to adjust Standard/Normal Temperature and Pressure values.
Configures fluid type, fluid, and temperature for density calculations.
Manages setpoint source, setpoint type, and valve offset for controllers.
Guides on adjusting PID parameters for specialized valve tuning.
Details the auto-tare feature for zeroing devices after a set delay.
Controls totalizer measurement for mass flow or volumetric counting.
Configures saving setpoint and gas type values to the device's EEPROM.
Guides on how to remove a device from the FlowVision 2.0 software.
Steps to create and define parameters for a new data log in FlowVision 2.0.
Details how to add and configure specific data points for logging.
Instructions for creating and configuring charts to display device data.
Covers chart functions like Rate, Auto Track, Auto Scale, Show Labels, Legend, and Drag to Pan.
Details various zoom functionalities for chart views, including In/Out and axis-specific zoom.
Fills the chart view with the selected data range using range selectors.
Covers functions like Save Image, Reset Zoom, and Duplicate chart.
Explains how to create and manage conditional, numerical, and device variables.
Describes creating numeric and conditional expressions for calculations and logic.
Provides an example of creating a Celsius to Fahrenheit conversion expression.
Guides on creating automated command sets and defining parameters for scripts.
Lists available script actions like Log, Apply Setpoint, Change Gas, Tare, and conditional actions.
Details how to run, stop, edit, and manage scripts, including output display.
An example script demonstrating totalizing flow over a period of 10 seconds.
Covers terminal functions like sending commands, auto-clear, showing live communication, and clearing the terminal.
Explains how to use the bootloader to update device firmware via COM port.
Guides on how to check for and install new software versions.
Instructions for removing the FlowVision 2.0 software from the system.
Troubleshooting steps for resolving issues where an Alicat device doesn't connect.
Steps to resolve issues encountered during the FlowVision 2.0 software installation.
Guidance on how to find previously captured log data files.
To Next Page