Alicat FlowVision 2.0 - Installation Guide; Software Installation Steps

Installation September, 2022 • Rev. 2 • FlowVision 2.0™ user manual 4
Installation
Follow these instructions to install the FlowVision 2.0™
software onto the computer intended for use with the Alicat
device.
▲
Caution: Do not turn off or restart the
computer during the installation process,
as this causes FlowVision 2.0™ to not install
properly and may damage the computer.
. Open a browser and go to the FlowVision 2.0™ software
page on the Alicat Scientific website, located here:
alicat.com/flowvision.
2. Click Download FlowVision 2.0™ to download the file.
Open the file (Setup_FlowVision_2.0_Latest.exe) to
begin the installation.
3. Choose which folder to installFlowVision2.0™.By
default, the program creates a program folder and
subfolder in AppData. If you want to use another install
directory, click Browse and navigate to the desired
location.Click Next to proceed to the next step when
ready.
4. Review the information on the screen. Once the infor-
mation has been confirmed to be correct, click Install
to begin the installation. If the information is not correct,
click Back and review the previous steps.
5. When the installation process is complete, click Close
to exit.
To start the FlowVision2.0™program, select the program
shortcut from the Start Menu: Alicat Scientific
→
FlowVision
2.0™.