Connecting to a Device September, 2022 • Rev. 2 • FlowVision 2.0™ user manual 8
Connecting Using Bluetooth
See figure 9
If your Alicat device has Bluetooth capabilities, you can
connect to FlowVision2.0™ wirelessly using the steps below.
!
Note: Alicat devices with Bluetooth
include the FP-25 and the MB units
with the Bluetooth configuration
(–BT in the part number).
. With your device powered on and within the Bluetooth
range, click the green plus sign to the right of the
search bar in the Devices module. The Add Device
window appears.
2.
Select the Bluetooth option. The window automatically
starts scanning for Alicat devices over Bluetooth. Once
detected, the device appears with Alicat, its model, and
its serial number.
3. Select the device and click the Add button.
4.
Click the Close button (X) at the top-right corner to
exit the add device window. Once the device has been
added, it appears as an entry under the Devices module
in its saved entries list.
Figure 9. Connecting using Bluetooth.
To Next Page
Loading...