Layout September, 2022 • Rev. 2 • FlowVision 2.0™ user manual 5
Layout
FlowVision 2.0™ is a modular program with access to layout
customizations that best suit your needs. This section
covers the Flowvision 2.0™ visual space and details how
to customize the software windows and tabs.
Workspace and Tabs
The workspace is the main window of Flowvision 2.0™
(figure 1). The modules list on the left provides access to
the software functions. When tabs are opened, they attach
at the top of the workspace in the tabs group (figure 2).
• Click on a tab for it to expand and fill the workspace.
Tabs are the access point for data, charts, information,
and allow interaction with your device. Tabs are
individually selected by clicking on the tab title.
• Close a tab by clicking the close button
(X) in the right of the tab’s title.
• Separate a tab by clicking and dragging
the tab’s title away from the tabs group it
separates and floats on its own. A separated
tab can leave the workspace window.
Module Panel
See figure 3 and 4
When FlowVision 2.0™ starts, it displays a panel of modules
on the left-hand side. These modules are the main compo-
nents that allow for interaction with your Alicat devices.
Collapsing and Expanding Modules
Clicking on a module expands it with a list of the saved
entries for that module. Within that this expanded space
is also a search bar and a green plus icon that is used to
add new entries. Clicking outside of the expanded module
collapses it back into the Module Panel.
Adding and Deleting Entries
Click the green plus sign to the right of the search bar to
add an entry to a module. Once a model is added it is added
to the saved entries just below the search bar. Entries are
sorted by the order they are added to the module.
• Click on a saved entry to open a tab for that entry
• Hover over the an entry and click the gear icon
( ) to edit or remove an entry from a module.
Figure 1. Workspace.
Figure 2. Tabs group.
Figure 3. Module panel.
Figure 4. Expanded module.
To Next Page
Loading...