Alicat FlowVision 2.0 - Welcome to FlowVision 2.0; System Requirements

To Next Page

To Previous Page

Introduction September, 2022 • Rev. 2 • FlowVision 2.0™ user manual 3

Welcome to FlowVision 2.0™!

FlowVision 2.0™ is a graphics-based software for operating

any Alicat ﬂow or pressure device via a graphical user

interface (GUI). FlowVision 2.0™ is the latest version of Alicat

Scientiﬁc’s FlowVision™ software.

FlowVision 2.0™ can be used to:

• Access information from Alicat devices

• Make conﬁguration changes to Alicat devices

• Monitor performance

• Log data

• Chart data

• Script/automatedevice operations

• Communicate directly with the

device via a terminal tab

Note: Identiﬁers and scripts from

earlier versions of FlowVision™ are

not recognized by FlowVision 2.0™

System Requirements

• Microsoft Windows 7 SP1, Windows

8/8.1, Windows 10, Windows 11

• Microsoft .NET Core 3.1*

• An internet connection (if installing via web)

• Serial port**

* Microsoft .NET Core 3.1 can be downloaded at:

https://dotnet.microsoft.com/download/dotnet/3.1/runtime

** Some computers are not equipped with physical serial ports. A

virtual serial port can be utilized with a USB to serial adapter.