12 | About your monitor
Back view
Back view without monitor stand
Back view with monitor stand
Label Description Use
1 Regulatory label Lists the regulatory approvals.
2 Stand release button Releases the stand from the monitor.
3
VESA mounting holes (100
mm x 100
mm - behind VESA
Cover)
Wall mount the monitor using VESA-
compatible wall mount kit (100 mm x
100 mm).
4 Headphone hanger Push to release the headphone hanger
t
o hang a headset.
NOTE: Ac
cessory headset weight
should be < 500.00g (if user have an
accessory headset).
5 Cable-management slot (at
th
e back of the stand)
To organize cables by routing them
through this slot.
To Next Page
Loading...
