Operating the monitor | 59
When the monitor goes into Standby mode, the
following message appears:
Activate the computer and wake up the monitor to gain access to the OSD.
See Troubleshooting for more information.
Setting the maximum resolution
NOTE: The steps may vary slightly depending on the version of Windows
you have.
To set the maximum resolution for the monitor:
In Windows 8.1:
1. For
Windows 8.1, select the Desktop tile to switch to classic desktop.
2. Right-clic
k on the desktop and click Screen resolution.
3. If y
ou have more than one monitor connected, ensure that you select
AW2524H.
4. Cl
ick the Screen Resolution dropdown list and select 1920 x 1080.
5. Cl
ick OK.
In Windows 10 and Windows 11:
1. Right-clic
k on the desktop and click Display settings.
2. If y
ou have more than one monitor connected, ensure to select AW2524H.
3. Cl
ick the Display Resolution dropdown list and select 1920 x 1080.
4. Cl
ick Keep changes.
If you do not see 1920 x 1080 as an option,
you must update your graphics
driver to the latest version. Depending on your computer, complete one of the
following procedures:
If you have a Dell desktop or a laptop:
•Go to www.dell.com/support, enter your service tag, and download the
latest driver for your graphics card.
If you are using a non-Dell computer
(laptop or desktop):
• Go to the support site for your non-Dell
computer and download the latest
graphics card drivers.
To Next Page
Loading...
