Setting up the monitor | 37
Removing the monitor stand
CAUTION: To prevent scratches on the LCD screen when removing the
stand, ensure that the monitor is placed on a soft surface and handle it
carefully.
NOTE: The following steps are specifically for removing the
stand that is
shipped with your monitor. If you are removing a stand that you
purchased from any other source, follow the setup instructions that are
included with the stand.
To remove the stand:
1. Turn off the monitor.
2. D
isconnect the cables from the computer.
3. Pl
ace the monitor on a soft cloth or cushion.
4. D
isconnect the cables from the monitor and slide them out through the
cable-management slot on the stand riser.
5. P
ress and hold the stand release button at the back of the display.
6. Lift the stand assembly up and away from the monitor.
To Next Page
Loading...
