Need help?Do you have a question about the Alinco DJ-CRX1 and is the answer not in the manual?
General| Brand | Alinco |
|---|---|
| Model | DJ-CRX1 |
| Category | Transceiver |
| Language | English |
Information prior to using the radio.
Safety precautions during thunderstorms.
Expected communication range and factors affecting it.
Guidelines for radio usage environment and conditions.
Precautions for environmental factors and usage conditions.
Specific guidance related to the transceiver unit.
List and images of included accessories with the transceiver.
Instructions and advice for charging the battery.
Information about compatible Alinco chargers.
Important warnings and guidelines for battery charging.
Steps for attaching and detaching the battery pack.
Instructions for connecting and disconnecting the antenna.
How to attach and detach the belt clip accessory.
Guidance on connecting external microphones.
Explanation of the transceiver's LCD screen layout and icons.
Instructions for powering the transceiver on and off.
How to control the audio output volume.
Procedure to toggle between main and sub bands.
Changing between channel and VFO operational modes.
Steps to select or input specific radio channels.
Method to adjust the operating frequency.
How to scan for FM radio stations.
Indicators and procedures when receiving a signal.
Basic steps for transmitting a signal.
Activating the emergency alarm function.
Explanation of programmable side key functions.
Functions associated with the MONI key.
Procedure to modify existing channel settings.
Steps to remove a channel from memory.
Setting scan limits for VFO mode.
How to activate and deactivate the FM radio function.
Configuring CTCSS/DCS signaling for channels.
Scanning for CTCSS/DCS tones.
Setting the direction for frequency offset.
Initiating frequency or channel scanning.
Configuring which channels to skip during scanning.
Reversing transmit and receive frequencies.
Adjusting the transmit power level.
Sending and checking DTMF codes.
Enabling or disabling the keypad lock function.
Using the built-in stopwatch feature.
Configuring CTCSS/DCS encoding parameters.
Configuring CTCSS/DCS decoding parameters.
Setting up synchronized CTCSS/DCS encode/decode.
Adding or removing DTMF signaling.
Combining different signaling functions.
Selecting the frequency step size.
Selecting between wide and narrow FM bandwidth.
Function to reverse TX/RX frequencies.
Activating the Talk Around feature.
Setting the offset frequency value.
Assigning names to channels.
Preventing transmission on busy channels.
Disabling transmission under certain conditions.
Configuring what is shown on the sub-band display.
Enabling or disabling beep alerts.
Setting the maximum transmission time.
Using voice activation for transmission.
Adjusting the delay for VOX function.
Setting the auto power-off timer.
Configuring the duration of DTMF signals.
Adjusting the sensitivity for receiving signals.
Setting the duration for stopping during scans.
Configuring how long function icons are displayed.
Adjusting the brightness of the LCD backlight.
Selecting the color for the LCD backlight.
Displaying the transceiver's self-ID.
Setting tone burst frequencies for repeaters.
Configuring battery saving modes.
Enabling or disabling the FM radio function.
Customizing the functions of PF1 and PF2 keys.
Changing the display mode of the transceiver.
Resetting the transceiver to factory settings.
Copying programming data between transceivers.
Detailed instructions for cable cloning.
Overall specifications of the transceiver.
Technical details of the receiving circuitry.
Technical details of the transmitting circuitry.
Common issues encountered with the transceiver.
Solutions and steps to resolve transceiver problems.
Table of CTCSS tones and their corresponding frequencies.
Table of DCS codes and their associated frequencies.
To Next Page
