Need help?Do you have a question about the Alinco DR-110T and is the answer not in the manual?
General| Brand | Alinco |
|---|---|
| Model | DR-110T |
| Category | Transceiver |
| Language | English |
Welcome message and overview of the ALINCO transceiver's capabilities.
Check the package contents for the included accessories like microphone, power cord, and mounting hardware.
Covers frequency range, antenna impedance, power requirements, dimensions, and weight of the transceiver.
Details transmitter output power, emission mode, modulation system, frequency deviation, and spurious emissions.
Provides information on receiver sensitivity, selectivity, intermediate frequencies, and audio output.
Explains the function of each control on the front panel, including Main Dial, Power, Volume, Squelch, and function keys.
Illustrates the microphone connector pinout and its function for communication.
Details the meaning of indicators like REV, BUSY, S/RF Meter, ON AIR, and memory indicators.
Covers the antenna connector, power connector, and external speaker jack on the rear panel.
Procedure to select desired frequency step intervals using the Main Dial or microphone buttons.
Learn how to lock function keys to prevent accidental changes and enable/disable operational beep tones.
Configure memory channels to skip during scans and manage the dedicated CALL channel.
Details memory battery, microprocessor reset procedure, memory channel storage, and entry process.
Guide to setting up and performing programmable, memory, and band scans.
Learn to monitor a priority memory or VFO channel while operating on another frequency.
Steps to select desired CTCSS tone frequencies for communication.
Explanation of how CTCSS squelch filters transmissions based on received tone frequencies.
Guide to repeater operation, including setting transmit offset frequencies and directions.
How to use the Reverse key to swap transmit and receive frequencies for repeater pairs.
Covers basic simplex transmission and operation with non-standard odd offsets.
Detailed steps and chart for selecting CTCSS tone frequencies for communication.
Procedure to activate and deactivate the Tone Squelch (CTCSS) function for noise-free reception.
Guide to repeater operation, including setting transmit offset frequencies and directions.
How to use the Reverse key to swap transmit and receive frequencies for repeater pairs.
Instructions for selecting a location and mounting the transceiver in a vehicle.
Guidance for installing the transceiver for fixed base station operation with a power supply.
To Next Page
