Need help?Do you have a question about the Alinco DR-150T and is the answer not in the manual?
General| Brand | Alinco |
|---|---|
| Model | DR-150T |
| Category | Transceiver |
| Language | English |
Lists standard and optional accessories included with the transceiver.
Details mobile and base station installation procedures and requirements.
Lists the technical specifications for the DR-150T and DR-150E models.
Identifies and explains the primary functions of the transceiver's front panel controls and indicators.
Describes the various indicators and symbols shown on the transceiver's LCD display.
Details the connectors and ports located on the rear panel of the transceiver.
Explains the functions of the microphone buttons and pin assignments.
Covers basic receiving functions including power on, volume, and squelch adjustment.
Explains how to select frequencies, output power, and transmit using the microphone.
Describes the different operating modes: VFO, memory, and call modes.
Details how to operate on main and sub bands and change between them.
Explains how to manage memory channels, including calling and programming.
Covers the operation and programming of the dedicated call channel.
Describes the Channel Scope function for monitoring signal levels around a frequency.
Explains different scanning types (band, programmed, memory) and how to set them.
Details the sweep scan function for measuring and indicating signal levels during scanning.
Explains how to set up and use the priority watch feature.
Covers additional functions like S-meter squelch and squelch timer.
Describes the process of transferring transceiver data between units for copying.
Explains the different CPU reset functions to restore factory defaults.
Details how to set up and use the Tone Squelch (CTCSS) feature for quiet standby.
Explains the DTMF Squelch (DSQ) function for selective communication.
Covers the auto-dialing function to send programmed DTMF codes.
Provides instructions for operating remote control functions via the microphone.
Details the connection and operation for 1200 bps packet communication.
Explains the setup and operation for 9600 bps packet communication.
Provides solutions for common problems and operational issues with the transceiver.
To Next Page
