Need help?Do you have a question about the Alinco DR-112E and is the answer not in the manual?
Covers frequency range, impedance, power supply, and current drain.
Details output power, emission mode, modulation, deviation, spurious emission, and operating mode.
Outlines receiving system, selectivity, intermediate frequency, sensitivity, and audio output.
Describes the main dial, volume, squelch, high/low power, and power switch.
Explains the MHz, VFO/M, REV, SHIFT, TONE, PRI, SCAN, and CALL keys.
Details the connection points for the microphone.
How to select the desired frequency step for operation.
Enables disabling all function keys except PTT for safety.
Controls the function confirmation tone for user feedback.
Allows skipping unwanted memory channels during scanning.
Stores and recalls a specific memory channel for quick access.
Covers microprocessor initialization, memory contents, and entry procedures.
Scans frequencies stored in memory channels A and B.
Scans through all programmed memory channels.
Scans the entire tuning range of the selected band.
Alternates between a priority memory channel and VFO frequency.
Alternates between a VFO frequency and a priority memory channel.
Alternates between a call channel and VFO frequency.
Direct transmit and receive on the same frequency.
Transmitting and receiving on frequencies with non-standard offsets.
Guidance on mounting and connecting the transceiver in a vehicle.
Instructions for setting up the transceiver for base station use.
General| Brand | Alinco |
|---|---|
| Model | DR-112E |
| Category | Transceiver |
| Language | English |
To Next Page
