Need help?Do you have a question about the Alinco DR-605T and is the answer not in the manual?
General| Mode | FM |
|---|---|
| Receiver Sensitivity | 0.16 µV (12 dB SINAD) |
| CTCSS Encode/Decode | Yes |
| Power requirements | 13.8 V DC |
| Power Output | 50W |
Explains front panel controls, LCD display, rear panel connectors, and microphone interface.
Provides instructions for connecting the microphone, antenna, and power supply for base station setup.
Details the procedures for installing the transceiver and antenna for mobile operation in a vehicle.
Covers turning the transceiver on, adjusting volume and squelch levels, and selecting the main band.
Explains how to select the main band, set frequency, choose output power, and transmit.
Details how to store, recall, and erase memory channels for frequently used frequencies.
Details how to use the optional tone squelch unit for selective communication by matching tones.
To Next Page
