Do you have a question about the Alinco DR-605E and is the answer not in the manual?
Brand | Alinco |
---|---|
Model | DR-605E |
Category | Transceiver |
Language | English |
Lists and describes the items included in the DR-605 package.
Details the front panel controls, primary functions, and LED indicators.
Explains the various icons and indicators displayed on the LCD screen.
Describes the rear panel connectors and microphone functions.
Covers connecting microphone, antenna, power supply, and external speaker for base station use.
Details mobile installation, connecting microphone, power supply, and antenna.
Covers powering on, adjusting volume and squelch, and setting frequency for reception.
Details selecting main band, frequency, output power, and the transmission process.
Explains the VFO, Memory, and CALL operating modes.
Covers storing, recalling, programming, and erasing memory channels.
Covers recalling and changing the CALL channel frequency.
Explains band scanning, memory scanning, and operations during scanning.
Covers Tone Encoder, TOT, Split, Reverse, Key Lock, Monitor, Beep settings.
Explains how to reset the transceiver to factory default settings.
Explains activating tone squelch, selecting tone frequency, transmission, reception, and scanning.
Describes how to transmit a burst tone for repeater access.
Provides solutions for common problems with the transceiver.
Instructions on how to clean the transceiver's control panel and case.
Details packet operation, requirements, and input sensitivity for 1200/9600 bps.
Explains how to access and exit channel display mode.
Describes how the DR-605T can operate as a crossband repeater.
Outlines the procedure for cloning data between transceivers.
Introduces the SET mode for configuring various transceiver functions.
Explains the selectable scanning resume conditions (Timer and Busy mode).
Describes how to change the tone burst frequency.
Explains how to set the Busy Channel Lock Out level.
Details how to enable/disable MONITOR and KEY LOCK functions.
Lists available optional units like Tone Squelch and DTMF microphone.
Provides detailed technical specifications for DR-605T and DR-605E models.