SpeedSentry Radar Speed Display - 23
Older signs and some Factory Recertified signs can be controlled using a Windows based PDA and the
Pocket ATS Software. Most settings on the sign can be controlled using Pocket ATS Software. When traffic
data is collected with the PDA it must be synced to a PC and analyzed using a client based version of ATS
software.
For complete information on Pocket ATS, see the Pocket ATS for PDA with Windows Mobile Instructions.
Client Based PC Software - Archive
For legacy units (most before October 2010) there is software that must be installed on a PC. Using this
software, sign settings can be modified and traffic data can be analyzed. The PC is connected to the sign
with a USB or serial cable. There is no bluetooth wireless option for the client based software Contact ATS
with questions regarding this legacy software.
To Next Page