SpeedSentry Radar Speed Display - 22
Control and Interface Options Explained
Control Options for all ATS Signs
There are multiple ways to control each ATS Sign. This chapter provides an introduction to the various
methods and where to find instructions for each method.
All signs have some version of on-board controls so that the most basic sign settings can be adjusted without
any interface device. On speed displays the speed limit and display mode can be set. On message signs, the
display mode and message can be selected. These controls are covered in each sign specific manual.
PC with Bluetooth or USB Connection
A PC can be used to change any settings on the sign. The standard method, included with all signs, uses the
provided USB cable to connect to the signs. Optional wireless bluetooth communication is available for all
units to simplify this connection. The software used on the PC is a local version of the ATS web-based
SmartApps interface. The first time you use this interface, you must be connected to the internet so that
the SmartApps w ebsite can be opened and a local v ersion of the w eb page installed on your PC. This
allows for use whether there is an internet connection available or not. The web-based software connects to
the unit with ATS Assist software which must be installed on the computer that will be connected to the sign.
For details on PC controls, see the PC with Local SmartApps Control Manual.
ATS Mobile is an app for Android devices. It will work on most android devices, whether a phone or tablet.
ATS Mobile communicates with the sign using bluetooth wireless technology. It also talks to the ATS servers
using wifi or cellular connections so that your traffic data and messages are stored, managed and backed up
on the server. With ATS Mobile you can change just about any setting on the signs and download traffic
data. A standard set of reports is available to analyze traffic data collected using ATS Mobile on the
SmartApps website if subscribed to SmartApps or if the unit has the traffic data option.
For complete information on ATS Mobile, see the ATS Mobile for Android Instructions.
SmartApps Web-Based Remote Communication
SmartApps is the All Traffic Solutions web-based interface used to manage all ATS products and a
department's traffic safety program. The subscription SmartApps service provides online web-based remote
equipment management through the sign's included cellular connection. The service includes mapping of
equipment and data locations, remote alerts, imaging and reporting on collected data. A limited version of
the SmartApps interface is used for a PC connected locally to the sign with a USB cable or Bluetooth, one of
the options mentioned above. All equipment can be upgraded to the SmartApps remote service. Call All
Traffic Solutions for more information.
For complete information on SmartApps, see the SmartApps Web-Based Management Instructions.
To Next Page
Loading...