ALLEN & HEATH GL2 User Manual

General overview of the GL2 console and its purpose.

Crucial safety information for operating the console.

General advice to prevent damage and ensure longevity.

Overview of the GL2's design and purpose.

Highlights of the console's capabilities and versatility.

Detailed performance metrics, dimensions, and electrical requirements.

Information on input/output connectors and their wiring.

Guidance on rack mounting and table-top placement.

Procedures for safe and noise-free grounding.

Best practices for connecting equipment and cables.

How to set gain and fader levels for optimal performance.

Details on optional features and alternative settings.

Connecting and selecting mic or line sources.

Controls and functions of the channel equaliser.

Setting up aux sends for effects and monitors.

How to route signals and adjust the stereo image.

Using PFL and PEAK indicators for setup.

Connecting and selecting dual stereo sources.

Using the equaliser on stereo channels.

Configuring aux sends for stereo channels.

Panning and routing stereo signals.

Monitoring signal levels on stereo channels.

Switching between FOH/Recording and Monitor modes.

Handling external returns and creating subgroups.

Combining channels under a single fader.

Managing group faders, mutes, and AFL.

Listening to sources via headphones and monitor meters.

Connecting and using a 2-track recorder.

Configuring the mono output for different applications.

Managing the primary stereo outputs.

Typical setup for live sound reinforcement.

Application of dynamics processing.

Setting up independent monitor mixes for performers.

Dedicated monitor output for the sound engineer.

Configuring for LCR FOH with monitors.

Tuning EQs for acoustic feedback and clarity.

Using the console for multitrack and mastering recorders.

Monitoring track returns and group sends.

Mixing track returns and using subgrouping.