Need help?Do you have a question about the ALLEN & HEATH GL4000 and is the answer not in the manual?
General| Type | Analog Mixing Console |
|---|---|
| Groups | 8 |
| Faders | 100mm |
| Frequency Response | 20Hz - 20kHz |
| Channels | 40 |
| Mic/Line Inputs | 40 |
| EQ | 4-band with 2 sweepable mids |
| Direct Outputs | Yes |
| Phantom Power | Yes |
| Metering | LED |
| Total Harmonic Distortion | < 0.005% at 1kHz |
| Noise (EIN) | -128dB |
| Dimensions | Varies depending on frame size. e.g., 40 channel: 1367mm (W) x 724mm (D) x 223mm (H) |
Procedures for removing circuit boards and setting channel mute assignments.
Steps for fitting the GL4000 expander option to the console.
Instructions for installing the SYS-LINK option for console interconnection.
Schematic diagram of the mono/stereo input channels and talkback circuitry.
Block diagram showing signal flow for groups, aux sends, matrix, etc.
Detailed schematics for various PCBs like Mono Input, Stereo Input, Master, MPU, etc.
Instructions for replacing the mains input fuse in the RPS11.
To Next Page
