Need help?Do you have a question about the ALLEN & HEATH GL3000 and is the answer not in the manual?
General| Faders | 100mm |
|---|---|
| Aux Sends | 6 |
| Group Outputs | 8 |
| Matrix | 2 |
| Type | Analog |
| EQ | 4-band EQ |
| Phantom Power | Switchable per channel |
| Frequency Response | 20Hz - 20kHz |
| Power Supply | Internal |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Channels | 24, 32, 40 (depending on model) |
Outlines the terms and conditions for product warranty coverage.
Gives a brief overview of the GL3000's capabilities and the purpose of the guide.
Explains how to get service and support for the console.
Details the importance and procedure for proper audio system earthing.
Provides guidance on connecting audio cables correctly to minimize noise.
Explains how to set signal levels for optimal performance and signal-to-noise ratio.
Lists detailed electrical parameters, frequency response, distortion, and noise levels.
Details the types and wiring conventions for all input and output connectors.
Explains setup for mono sources, including phantom power, phase, and gain adjustment.
Describes setup for stereo sources, including gain adjustment and stereo/mono selection.
Details the 8 aux send outputs for monitors and effects, including pre/post switching.
Covers mute, pan, faders, meters, and PFL/AFL functions on individual channels.
Explains group outputs and the use of mode switches for monitor configurations.
Illustrates how to group channels for better control and stereo imaging.
Describes the function and connection of stereo return inputs for effects.
Details the main L, R, and Mono outputs, including insert points and balancing.
Explains headphone monitoring options and the selection of monitor modes.
Details the talkback microphone input and its functionality for stage communication.
Describes the connections for stereo recorders, including send and return levels.
Explains the application and configuration of the matrix outputs for additional routing.
Details internal link configurations for aux send behavior and phantom power.
Covers link options for the LR sum source and group meter/matrix feeds.
To Next Page