Need help?Do you have a question about the ALLEN & HEATH iDR-48 and is the answer not in the manual?
General| Brand | ALLEN & HEATH |
|---|---|
| Model | iDR-48 |
| Category | Music Mixer |
| Language | English |
Read important safety instructions printed on the sheet supplied with the equipment.
Describes how firmware determines feature set and availability of updates.
Lists additional resources like User Guides and the Allen & Heath website.
Avoid placing heavy objects, scratching, or rough handling to prevent damage.
Protect from dirt, dust, heat, vibration, and moisture. Dry thoroughly if wet.
Clean with a soft brush and dry cloth; use vacuum for grilles. Do not remove cover.
Transport in original packing or flightcase to protect from damage.
Plan cable location to avoid strain and tripping hazards.
Do not remove modules while power is applied.
Heart of the digital audio processing system with 10 card slots for input/output modules.
Similar to iDR10 but without card slots, receiving audio via EtherSound network.
Controller with up to 44 faders, 4 slot card frame for local I/O modules.
Cables used for connecting rack and surface, with optional longer drums available.
Rack-mounted external power supply for redundant backup of Surface or iDRO MiniRack.
4-pin XLR gooseneck LED lamp with built-in dimmer.
Remote controllers compatible with iLive, programmable via Surface or Editor software.
Touring grade flightcases with wheels, shock mounts, and protective covers.
PC and MAC software for controlling the iLive system or editing settings offline.
Largest fixed format MixRack with 64 Mic/Line inputs and 32 XLR line outputs.
Fixed format MixRack with 48 Mic/Line inputs and 24 XLR line outputs.
Fixed format MixRack with 32 Mic/Line inputs and 16 XLR line outputs.
Smallest fixed format MixRack with 16 Mic/Line inputs and 8 XLR line outputs.
Largest T Series Surface with 28 faders and 16 local I/O connections.
T Series Surface with 20 faders and 10 local I/O connections.
Smallest Surface with 12 faders and 8 local I/O connections.
Range of remote controllers connecting via PL-Anet, programmable from Surface or laptop.
Uses 2x CAT5 cables for AUDIO and CONTROL, allowing up to 100m connection.
Uses a single CAT5 cable for AUDIO and CONTROL, allowing up to 120m point-to-point link.
Uses a single CAT5 cable up to 120m for ACE ports, transporting audio and control.
Details IP address configuration for MixRack, Surface, and laptop for system connectivity.
Connect laptop via Ethernet for iLive Editor software control.
Connect PL controllers via CAT5 cable to the MixRack PL-Anet port.
Details the time taken for MixRack, Surface, and TouchScreen to boot up.
Procedure for safely shutting down the system and archiving settings.
Fixed format audio interface for local input/output connections on T Series Surfaces.
Modular iLive surfaces with 4 slots for audio modules, up to 32 connections.
Specifics for iLive-T112 Surface, detailing 16 inputs and 12 outputs.
Specifics for iLive-T80 and R72 Surfaces, detailing 8 inputs and 8 outputs.
Provides 8x high-performance analogue input preamps for mic/line level signals.
An 8-channel module connecting up to 16 mic or line signals with input selection.
8x balanced line level outputs operating at +4dBu with +22dBu maximum output.
Module providing 8 digital inputs with choice of AES, SPDIF, or optical format.
Module providing 8 digital outputs in AES, SPDIF, and optical formats.
Provides 16 outputs in various digital formats like ADAT, IDR Expander, and Aviom.
The DSP mix engine, handling audio processing and internal effects.
Handles audio clock, headphones, and interface for two digital audio networks.
Built-in amplifier with volume control and 1/4" output for listening to selected signals.
Indicates digital audio sync lock status.
Configures the audio clock source for the MixRack system.
Options for audio networking, primarily EtherSound for Port A and system expansion for Port B.
Older version supporting EtherSound network options, superseded by RAB2.
Newer version supporting various digital audio and networking card options.
Provides multi-channel digital audio link for MixRack-Surface connection or signal distribution.
Provides a second digital network option for system expansion or signal distribution.
BNC connectors for synchronizing iLive audio clock to external devices.
Modules managing the iLive modular Surface and its control/digital audio interfaces.
Controller module housing network and other interfaces for MixRack control.
Provides digital audio port for interfacing audio to/from MixRack and networking.
Older module supporting EtherSound network option, not Port B.
Newer version supporting various digital audio/networking cards, compatible with MixRack.
64 channel audio/control link between devices using single CAT5 cable.
EtherSound networking using AVDM circuit for 64 channel bi-directional audio.
Mini Multi Out module providing ADAT, Aviom, and IDR expander digital outputs.
MADI interface for multi-channel digital audio networking with 3rd party equipment.
Instructions for fitting the M-ACE card to Port B on iDR-32/iDR-48 MixRacks.
Instructions for fitting the M-ACE card to Port A/B on iDR10 and iLive Surfaces.
Using ACE for a simple, single-cable point-to-point link between Surface and MixRack.
Assigning signals to outputs or selecting sources from Port B using the TouchScreen.
Steps to install the M-ES-V2 EtherSound card into the RAB2 module.
Assigning sources and destinations for EtherSound channels via Surface or Editor.
Process of fitting the M-ES-V1-BASE carrier frame into the RAB2 module.
Process of plugging the EtherSound card onto the carrier card.
Attaching foam strip to protect circuit connections.
Assigning sources and destinations for EtherSound channels.
Instructions for fitting the M-MMO card to Port B of fixed format MixRacks.
Instructions for fitting the M-MMO card to Port A or B of iDR10 and iLive Surfaces.
Instructions for fitting the M-MADI card to Port B of MixRacks.
Instructions for fitting the M-MADI card to Port A or B of iDR10 and iLive Surfaces.
Supports two separate MADI BNC links for connecting to two devices simultaneously.
Configures LINK 1 and LINK 2 as a redundant pair for uninterrupted operation.
Configures the 5th BNC socket for various modes like output mirroring or word clock.
Provides a word clock input to sync the system from an external source.
Provides a standard word clock output for syncing other systems.
Details recommended 75 ohm coaxial cables and their maximum lengths for MADI.
iDR-8 and iDR-4 rack mounted mix processors for installed sound systems.
1U rack mounted 8 channel output expanders connectable via CAT5.
Remote controllers compatible with iDR and iLive systems, programmable via Surface or Editor.
Software for controlling the iLive system via Ethernet on PC or MAC.
18" gooseneck lamp with XLR connector and dimmer.
80m tour grade Neutrik EtherFlex CAT5e cable for EtherSound.
Optional 2U rack mounted power supply for redundant backup.
Touring grade flight cases for iLive systems, ordered separately for some models.
Instructions for fitting side trims for desk top configuration.
Instructions for mounting rack ears flush with the control panel.
Instructions for mounting rack ears angled at 16 degrees.
Details the conditions under which the warranty is valid and claims can be made.
To Next Page
