Need help?Do you have a question about the ALLEN & HEATH iDR-32 and is the answer not in the manual?
General| Brand | ALLEN & HEATH |
|---|---|
| Model | iDR-32 |
| Category | Music Mixer |
| Language | English |
Read safety instructions printed on the sheet supplied with the equipment.
The feature set of the iLive is determined by the operating firmware, which is updated regularly.
Refer to User Guides, Getting Started Guides, HELP MANUAL, and Allen & Heath website for more information.
Avoid heavy objects, sharp objects, rough handling, dirt, dust, heat, vibration, and moisture.
Clean with soft brush/dry cloth; transport in original packing or flightcase.
iLive offers modular and fixed format systems for flexible live sound mixing.
The MixRack houses the DSP mix engine, control, and audio networking interfaces.
The Surface controller allows remote control of the MixRack and other system components.
Describes the IDR10 MixRack and IDRO MiniRack, key components of modular systems.
Details the modular control surfaces available, with different fader counts and layers.
Covers CAT5 Cables, iPS10 Backup PSU, LEDlamp, Flightcases, PL Series Remotes, and System Manager.
Explains the CPU, DSP 'RackExtra', and REMOTE AUDIO modules within the MixRack.
Details MIC/LINE IN, LINE OUT, DUAL MIC/LINE IN, DIGITAL OUT, and DIGITAL IN modules.
Covers flight cases, module extractors, and power supply modules for the MixRack.
Describes the CPU, REMOTE AUDIO module, TouchScreen, and local audio connections.
Details Soft Keys, Talkback, PAFL, Fader Banks, and edit key functions.
Lists different iLive Surface models based on fader count and layers.
Introduces the IDR-64, IDR-48, IDR-32, and IDR-16 fixed format MixRacks.
Describes the iLive-T112, iLive-T80, and iLive-R72 fixed format Surfaces.
Overview of PL Series remote controllers for iLive systems.
Details Mic/Line inputs, Line outputs, MIDI, PL-Anet, Port B, SYSTEM LOCK, and ACE link.
Explains the network switch and ACE link functionality for fixed format MixRacks.
Describes the Channel Processing Strip, TouchScreen, and Soft Keys.
Details Fader Banks, edit keys, USB, VGA, and Surface to MixRack link.
Details Soft Keys, TouchScreen keys, Channel Processing Select, and Fader Banks.
Covers VGA, USB, PAFL, MIDI, and Surface to MixRack link for the R72.
Explains the main system connections using CAT5 cables for NETWORK and Port A.
Details the setup and requirements for using EtherSound for audio and control.
Explains the ACE™ system for transporting audio and control over a single CAT5 cable.
Describes how to set up a redundant ACE link for continuous operation.
Covers IEC mains power cord, voltage, grounding, and safety warnings.
Details the optional iPS10 rack-mounted power supply for redundant backup.
Explains how to connect the fixed format Surface to MixRack using an ACE port.
Provides factory default network addresses and troubleshooting tips.
Guides on adding laptop control via Editor and connecting PL Series controllers.
Step-by-step guide for turning on the iLive system and checking link indicators.
Details the boot-up duration for MixRack, Surface, and TouchScreen.
Instructions for safely shutting down the iLive system and archiving settings.
Describes the fixed audio interface for T Series Surfaces for local input/output.
Details the 16 inputs and 12 outputs on the iLive-T112 Surface.
Outlines the 8 inputs and 8 outputs on the iLive-T80 and R72 Surfaces.
Provides 8 high-performance analogue input preamps for mic and line level signals.
Offers 8 channels to connect up to 16 mic or line level signals with A/B input selection.
Features 8 balanced line level outputs for mixes, direct outs, or insert sends.
Provides 8 digital inputs with choice of AES, SPDIF, or optical TOSLINK formats.
Offers 8 digital outputs in AES, SPDIF, and optical TOSLINK formats.
Provides 16 outputs in ADAT, IDR Expander, AVIOM, and HearBus formats.
Details ADAT optical outputs and iDR Expander ports for multitrack recording and expansion.
Explains compatibility with Aviom personal monitor systems and HearBus.
Manages the MixRack system, power status, 12V lamp, and network interface.
Covers the 3-port Ethernet switch, network settings, and factory reset procedures.
Details the MIDI interface and PL-Anet port for remote control integration.
The DSP mix engine for audio processing, EQ, dynamics, and internal effects.
Handles audio clock, headphones, and interfaces for digital audio networks.
Explains SYSTEM LOCK, audio clock source selection, and Port A/B network options.
Latest version for digital audio networking, compatible with original RAB modules.
Provides multi-channel digital audio link for MixRack/Surface and signal distribution.
Offers second digital network option for expansion, mic splitting, and distribution.
The controller module housing the NETWORK and other interfaces for the Surface.
Provides digital audio ports for interfacing with the MixRack and networking.
Details the older RAB module and the newer RAB2 module for audio networking.
64 channel bi-directional audio/control link, alternative to EtherSound.
Low latency digital audio networking using EtherSound standard.
Provides ADAT, Aviom, and IDR expander digital output formats.
Dual port 64 channel bi-directional MADI audio interface.
Details ACE card's bi-directional audio/control link and network bridge capability.
Step-by-step guide for installing the M-ACE card into different iLive system components.
How to link MixRacks for audio splitting, FOH/Monitor systems, and inter-system comms.
Using Network Bridge for TCP/IP networks and ACE for redundant backup links.
Using ACE for simple single-cable point-to-point connection between Surface and MixRack.
Details CAT5e cable standards, recommended types, and connectors for ACE links.
How to assign signals to Port B outputs using the TouchScreen or Editor.
Provides EtherSound networking for 64 channels, compatible with Auvitran AVDM card.
Details EtherSound network setup, cable types, and the ES CONTROL PORT.
Guide for fitting the M-ES-V2 card and assigning audio channels.
Carrier frame to reuse original Auvitran AVD EtherSound cards with RAB2 modules.
Explains compatibility of RAB and RAB2 modules with EtherSound options.
Lists option cards like M-ES-V1-BASE, M-ES-V2, M-ACE, M-MMO, M-MADI.
Instructions for fitting the M-ES-V1-BASE carrier frame into the RAB2 module.
Guide for plugging the EtherSound card onto the carrier card.
Attaching the foam strip to protect circuit connections.
How to assign sources and destinations for EtherSound channels.
Provides ADAT, IDR/Hearbus, and Aviom digital output formats for recording and monitoring.
Instructions for installing the M-MMO card into iDR MixRacks and iLive Surfaces.
Assigning signals to MixRack Port B outputs via TouchScreen or Editor.
Using Surface Port B for outputs, and assigning signals to M-MMO option.
Default signal assignments for M-MMO outputs in Surface Port B.
Supports 64 channels of MADI audio transmission, alternative to EtherSound.
Step-by-step guide for installing the M-MADI card into iDR MixRacks and iLive Surfaces.
Explains Dual Link and Redundant modes for connecting two MADI devices simultaneously.
Covers AUX modes, Word Clock IN/OUT functionality for system sync.
Details MADI cable requirements, specifications, and recommended types.
Describes iDR-8, iDR-4 processors and IDR expanders for installed systems.
Details PL Series controllers, their compatibility, and programming.
Lists various PL controller models like PL-3, PL-4, PL-5, PL-6, PL-8, PL-9, PL-10, PL-11.
PC/MAC software for controlling the iLive system via Ethernet.
Describes the LEDlamp and the 80m CAT5 cable drum for system expansion.
Covers the iPS10 backup PSU and available flight cases for iLive systems.
Provides dimensions and weights for MixRack flight cases and PSU/MiniRack units.
Details dimensions and weights for various iLive modular surfaces and their flight cases.
Details dimensions for the iLive Surface flight cases.
Provides dimensions and weight for the iDR10 MixRack.
Details dimensions and weights for T112 and T80 Surfaces.
Provides dimensions and weights for fixed format MixRacks IDR-16, IDR-32, IDR-48, IDR-64.
Explains how to fit rack ears for the iLive-R72 Surface in flush or angled positions.
Advises on ventilation, connector space, and suitable rack cases.
Outlines the one-year warranty period, conditions, and return procedures.
To Next Page
