Need help?Do you have a question about the ALLEN & HEATH ZED-10 and is the answer not in the manual?
General| Mic Inputs | 4 |
|---|---|
| Line Inputs | 6 |
| Aux Sends | 2 |
| EQ Bands | 3-band EQ with MusiQ |
| Phantom Power | Yes |
| Type | Analog Mixer |
| Channels | 10 |
| Inputs - Mic Preamps | 4 |
| Inputs - Line | 6 |
| USB | Yes |
| Headphone Output | Yes |
| Inputs - Other | 2 (stereo) |
| Outputs - Main | XLR |
| Outputs - Other | RCA, USB |
| Computer Connectivity | USB |
| USB Audio Interface | Stereo In/Stereo Out |
| Weight | 3 kg |
Details the terms and conditions of the product's limited one-year warranty.
Crucial instructions on safe operation, cover integrity, power sources, and grounding.
Guidelines for water, ventilation, heat, servicing, installation, and mains plug wiring.
Instructions for correctly wiring the mains plug according to safety standards.
Advice on preventing damage, cleaning, transport, and protecting hearing from high volumes.
Information on the design, manufacturing, and robust construction of the ZED series mixers.
Discusses the mixer's versatility for live mixing, recording, and various venues.
Details the low-noise transistor circuitry used in the pre-amplifiers for high gain and linearity.
Explains the dedicated high impedance FET inputs for instruments like guitars.
Describes the 3-band EQ on mono channels and 2-band EQ on stereo channels.
Explains the separately switched stereo bus for recording or monitoring purposes.
Details the USB audio interface for easy computer connectivity for audio transfer.
Highlights the integrated, reliable power supply unit, not an external adapter.
Details Mic/Line sockets, Gain control, and the 100Hz Hi-pass filter.
Explains the High, Mid, and Low frequency equalizer controls and their effects.
Covers FX Send, Aux Send, Pan, Level, Record, and Listen functions.
Details the Hi Z input for instruments and the gain boost switch.
Describes ST-1b/ST-1a inputs and the ST-1 Gain control.
Details the high and low frequency equalizer for stereo channels.
Covers FX Send, Aux Send, Balance, and Level controls.
Explains the Record and Listen switch functions for stereo channels.
Details ST-2 input, Record OUT, Playback Input, and USB OUT selectors.
Covers Main Mix Out XLR, Insert sockets, and Effects/Aux outputs.
Details 48v mics, Monitor Level, Monitor Source, Aux Mix, and Main Mix Levels.
Explains Stereo Meters, PFL LED, Headphone level, and Source selectors.
Standard 1/4" jack socket for connecting headphones.
Details the stereo bi-directional USB 1.1 compliant audio CODEC.
Advice on checking system volume settings for proper audio transfer.
Diagram and explanation of insert cable wiring for send/return connections.
Explains Y-adapters, RCA, TRS, and XLR cable wiring standards.
To Next Page